CAMAC CRATE CONFIGURATION
Crate controller K-16
Dataway display
Timer TMP-Module
Polarimeter Interface Module
Counter #2
Counter #1
1 U, 3 V, 2 B, 4 R
N1, N2, NP, NTPM, NDD, NCC
Terminal, To IBM/PC
NCC = MAX. position
NDD - ANY position
NP - ANY position
NTPM = NP + 2
N2 = NP - 2
N1 = N2 - 1
FOR OBSERVATION MODE:
1. Install the jumpers inside the NP module in position "1".
2. Run PP.EXE from personal directory.
FOR SELF TESTING MODE:
1. Disconnect the 38-pin ELCO from polarimeter.
2. Reinstall both jumpers inside the NP module in position "2".
3. Disconnect and short "OUT 5" from NP module.
4. Run PP_ DEMO.EXE.
Note! (For all computer men):
PC-CAMAC adapter card use I/O ports 0x340 hex - 0x34F hex and IRQ
9. Don't conflict!